Compact Forged Valves
These types of valves are mostly forged steel. The body of valve is constructed by welding of all parts except stem housing. No sealing elements are used which might cause leakage through. Inspection and maintenance of such valves may be executed on live line. When required it can be manufactured from special material according to NACE corrosion standards and/or temperature class.
Compact Forged Ball Valves
Full Welded Ball Valve, Floating with Cap/Lever Underground Type - E604
It is ideal type for vent, drain, by-pass, take-off applications. Its control is capped and it doesn’t allow operation without opening the cap. It is often used in pipelines, for underground postions.
It can also be used as to impel to Gas Over Oil Hydraulic Actuators.
Application Area
Pipeline
Storage
Water Works
Vastas Figure
E604
Type
Full Welded Ball Valve, Floating, with Cap/Lever Underground Type
NPS
½”-3”
DN
15-80
Class
150-1500#
Features
Full Welded
Floating Ball
Full Bore
Anti Static Device
Fire Safe Design
Anti Blow Out Stem
Standards
» API 608, ISO 17292
Operators
» Lever Operated
Full Welded Floating Ball Valve, Forged - E60K
On-Off Valve. These valves are more compact and lightweight due to the use of floating ball, which is preferred in places with weight and space limitation. Since the body is welded, there is no risk of gasket leakage.
Application Area
Pipeline
Water Works
Vastas Figure
E60K
Type
Full Welded Floating Ball Valve, Forged
NPS
1”-4”
DN
25-100
Class
150-600#
Features
Full Welded
Floating Ball
Full Bore (FB)
Anti Static Device (ASD)
Fire Safe Desing (FSD)
Anti Blow Out Stem
Above / Under Ground (AG / UG)
Standards
» Design API 6D, API 608
» End to End ASME B16.10
» End Type, Butt weld ASME B16.25
» NACE MR0175, MR0103 (optional)
» Fire safe design, according to API 607 and ISO 10497
Operators
» Lever Operated
» Gearbox (G)
Top Entry Ball Valve, Floating Type - E60T
Closure valve. This type allows to make maintenance on the line without dismantling. Besides this feature, it is not different from a Split Body Ball Valve.
3” and above sizes are called as Trunnion type. They are ideal for welding usage and there is no need for flange connection type.
Application Area
Pipeline
Water Works
Vastas Figure
E60T
Type
Top Entry Ball Valve – Floating Type
NPS
1”-4”
DN
25-100
Class
150-600#
Features
Full Welded
Floating Ball
Full Bore (FB)
Anti Static Device (ASD)
Fire Safe Desing (FSD)
Anti Blow Out Stem
Above / Under Ground (AG / UG)
Standards
» Design API 6D, API 608
» End to End ASME B16.10
» End Type, Butt weld ASME B16.25
» NACE MR0175, MR0103 (optional)
» Fire safe design, according to API 607 and ISO 10497
Operators
» Lever Operated
» Gearbox (G)
Compact Forged Gate Valves
Gate Valve Bolted Bonnet, Rising Stem - E504
This is a closure valve. It is not used to adjust or throttling the flow. If needed, Globe Valve should be used beside it.
If often open-close application is necessary, Ball Valve should be preferred.
Application Area
Pipeline
Storage
Water Works
Vastas Figure
E504
Type
Gate Valve Bolted Bonnet, Rising Stem
NPS
½”-2”
DN
15-50
Class
150-1500#
Features
Bolted Bonnet(BB)
Outside Screwed & Yoke (OSY)
Rising Stem (RS)
Full Bore (FB)/ Standard Bore (SB)
Socket weld (SW), National pipe thread (NPT), Butt Weld (BW), FLanged End (RF/RIJ)
Above Ground (AG)
Standards
» API 602, BS5352
Operators
» Manual (Handwheel) operated
Gate Valve Bolted Bonnet, Rising Stem - E505
This is a closure valve. It is not used to adjust or throttling the flow. If needed, Globe Valve should be used beside it.
If often open-close application is necessary, Ball Valve should be preferred.
Application Area
Pipeline
Storage
Water Works
Vastas Figure
E505
Type
Gate Valve Bolted Bonnet, Rising Stem
NPS
½”-2”
DN
15-50
Class
150-1500#
Features
Bolted Bonnet(BB)
Outside Screwed & Yoke (OSY)
Rising Stem (RS)
Full Bore (FB)/ Standard Bore (SB)
Socket weld (SW), National pipe thread (NPT), Butt Weld (BW), FLanged End (RF/RIJ)
Above Ground (AG)
Standards
» API 602, BS5352
Operators
» Manual (Handwheel) operated
Compact Forged Check Valves
Check Valve, Lift, BB, Plug type Disc, Welded Integral Body Seat - E404
This is a non-return valve for general usage. It is used to prevent the pressure or flow repulse.
Application Area
Pipeline
Storage
Well Head
Water Works
Vastas Figure
E404
Type
Check Valve, Lift, BB, Plug type Disc, Welded Integral Body Seat
NPS
1/2”-2”
DN
15-50
Class
150-2500#
Features
Bolted Bonnet (BB)
Standard / Full Bore
Lift / Swing / Ball Type disc
NPT / Socket weld / Butt weld / Flanged End
Standards
» Design API 602, ASME B16.34
» NACE MR0175, MR0103
» Welding end dimensions ASME B16.25
» Socket weld end dimensions ASME B16.11
» Threaded NPT end dimensions ASME B1.20.1
» Flange end dimensions ASME B16.5
Operators
» Self Acting
Compact Forged Plug Valves
Plug Valve, BC Inverted Plug, Lubricated - E104
This type is designed to discharge the trapped pressure under control. It is preferred for purge, blow-off, by-pass, blow-out operations.
Depending on the usage frequency, it needs to be lubricated. It is not recommended to be used without a lubricating film in between the body and the plug.
This valve can be used for throttling and adjusting the flow. It is not the type advised for closing, and this is why it should be isolated with Ball or Gate valves.
Application Area
Pipeline
Water Works
Vastas Figure
E104
Type
Plug Valve, Lubricated
NPS
1/2”-2”
DN
15-50
Class
150-2500#
Features
Aboveground (AG)
Inverted Type
Lubricated
Operational easiness by quarter turn motion
Laminar flow
Standards
» Designed and approved as per API 599
» Design criteria ASME B16.34,
» Socket weld end dimensions ASME B16.11
» Threaded NPT end dimensions ASME B1.20.1
» Welding end dimensions ASME B16.25
» Flange end dimensions ASME B16.5
Operators
» Lever Operated
Compact Forged Globe Valves
Globe Valve, BB, Plug Type Disc, Weld Integral Body Seat - E304
This valve is used to adjust the flow rate, in the lines where high differential pressure occurs. It is not recommended as a closure valve. If necessary a gate valve should be placed in front of it. In case of request it can be designed as Globe-Check or Control Type Check Valve.
Application Area
Pipeline
Storage
Water Works
Vastas Figure
E304
Type
Globe Valve, BB, Plug Type Disc, Weld Integral Body Seat
NPS
1/2”-2”
DN
15-50
Class
800#
Features
Bolted Bonnet
Outside Screwed & Yoke (OSY)
Rising Stem (RS), Rising Hanwheel
Full Bore / Standard Bore
Socket weld, NPT, Butt weld, Flanged End
Above Ground (AG)
Standards
» Design API 602, ASME B16.34
» NACE MR0175, MR0103
» Welding end dimensions ASME B16.25
» Socket weld end dimensions ASME B16.11
» Threaded NPT end dimensions ASME B1.20.1
» Flange end dimensions ASME B16.5
Operators
» Manual (Handwheel) operated
Globe Valve, Bolted Bonnet, Plug Type Disc - E305
Closure valve. This type allows to make maintenance on the line without dismantling. Besides this feature, it is not different from a Split Body Ball Valve.
3” and above sizes are called as Trunnion type. They are ideal for welding usage and there is no need for flange connection type.
Application Area
Pipeline
Storage